Yodean decor will share some furniture sticker knowledge about our production, or other tech introduction about foil paper, hope we can help you a lot to know more information about furniture paper – green decorative sticker – environmental protective furniture wood paper.

Is PVC a good material for living room ceiling?

 

Is PVC a good material for living room ceiling

What are the requirements for the living room ceiling?

  • 1. Lighting:
    When we decorate the living room ceiling, we must first pay attention to the lighting problem. Feng Shui emphasizes brightness, and the interior must give people a bright feeling, so the living room ceiling must be equipped with a sufficient light source
  • 2. Chandelier shape:
  • 1. The shape of the living room ceiling is also very particular. First of all, it is taboo to use the mouth shape. The mouth-shaped living room ceiling with a person in the middle becomes a prisoner, which is very unfavorable for the residents of the house.
  • 2. At the same time, avoid the fishbone-shaped living room ceiling, because fishbones represent poverty and are not conducive to the development of the house’s wealth.
  • 3. Necessity Many friends don’t know whether they should install a ceiling at home. In fact, if the floor height is greater than 2.8 meters, installing a ceiling will not be too depressing, so it needs to be determined according to actual needs. If you don’t make a ceiling, the original ceiling will look very monotonous, so if you often have guests at home, it is necessary to make a ceiling.

How to deal with beams in the living room ceiling

1. Wrapping design：

If the living room ceiling has ugly beams, you can use the beam wrapping design method. The advantage of this method is that it can hide or divert the attention of the line of sight and reduce the visual pressure of the beams. For example, it can be made into an arc wrapping shape.

2. Combined with lighting, the beams in the living room ceiling cannot be directly removed. The simpler method is to use a large arc supplemented with indirect lighting to weaken the beams, making the space look tall and bright, and also allowing different fields to have the most suitable transition zone. Through this lighting design, the sense of oppression of the beams is visually reduced, and at the same time, it can also add fashion.
3. Modeling design:

If the house height at home is relatively high, you can incorporate the cross beams into it through the design of the ceiling; or use multi-level and curved shapes to integrate the beams into the ceiling shape through the ceiling levels.

What is the best material for the living room ceiling?

1. PVC plastic buckle:

PVC plastic buckle is a common ceiling material. It is very cheap and has moisture-proof, waterproof, and moth-proof functions.
The color of PVC plastic buckle is mostly plain, which can meet the decoration styles of different types of living rooms, and it is also convenient to clean later.

2. Aluminum buckle:

Aluminum buckle: It is a relatively new living room ceiling material. It has good moisture-proof, fire-proof, and corrosion-resistant capabilities, and its service life is relatively long, so it is deeply loved by the majority of families. Aluminum buckle ceiling is mainly divided into paint board, film-coated board and roller-coated board. The life of the paint will be shorter and easy to fade, but the appearance is beautiful. The comprehensiveness of the roller-coated board is OK, while the film-coated board has a short service life.

3. Gypsum board:

It is a baby ceiling that is widely used indoors. It has rich modeling performance, can be made into various groups, and can also be carved with animal and plant patterns. The material of the gypsum board ceiling is cheap, and the construction and installation are very convenient, but it is not waterproof and moisture-proof.

/0 Comments/by

Are there any new wood boards?

What is the material of ABS sheet？

  • 1. ABS sheet, a new material  in the sheet industry, has a very large output and is a widely used polymer. It organically unifies the various properties of PS, SAN, and BS, and has excellent mechanical properties of toughness, hardness, and rigidity. That means, its impact strength is very perfect and can be used at extremely low temperatures. Besides, ABS has excellent wear resistance, good dimensional stability, and oil resistance, which also can be utilized for bearings under medium loads and speeds.
  • 2. Among these features, ABS has greater creep resistance than PSF and PC.  And it is not impacted by water, inorganic salts, alkalis  or  various acids, but it is soluble in ketones,  aldehydes   and  chlorinated hydrocarbons. when corroded by glacial acetic acid, vegetable oils, etc, it will produce stress cracking.

What is the density of ABS sheet?

  1. Features: excellent impact strength,  good dimensional stability,  dyeability,  good molding and machining, high mechanical strength,  high rigidity, low water absorption, good corrosion resistance, simple connection, non-toxic and odorless, great chemical properties and electrical insulation properties.
  2. To be more detailed, ABS sheets are heat-resistant and do not deform. They also have high impact toughness under low  temperature conditions. Conventional ABS sheets are not very white, but they have very good toughness. They can be cut with a shearing machine or punched with a mold.So ,according to this character,ABS can still show a certain toughness at -40℃ and can be used in the temperature range of -40~100℃.

How to splice abs sheets？

  • First of all, ABS sheet splicing requires surface treatment. That means oil or dust on the surface of the material must be removed first, and then glue should be applied. The glue should be applied evenly and in place without leaving blind spots.
  • After applying the glue, quick bonding should be carried out immediately, and pressure should be applied to make the two sides of the ABS sheet fit tightly together. It is sure that that will be dry in about 2 hours and reach its peak strength after 24 hours.

    Applications:

    1. Fields: food industry parts, architectural models, prototype production, photoelectric industry parts, refrigerator refrigeration industry, electronic and electrical fields, pharmaceutical industry, etc.
    2.When  purchasing  ABS boards, you should look at the surface of the boards. Boards with smooth surfaces are better, and their color tones must be uniform. There should be no uneven color tones and no obvious bumps.However,alough ABS boards have many awesome properties, they are relatively expensive due to the high technical requirements.

 

The above is the relevant content about ABS panels. I hope it can help everyone. If you want to know more about ABS panels.please feel free to contact us or visit our website.

/0 Comments/by

How to Apply PVC Edge Banding to Furniture？

,

How to Apply PVC Edge Banding to Furniture

How to Apply PVC Edge Banding to Furniture

Before you start applying your new pvc edge banding, you should know a few things. Here, you will learn about materials and applications, how to clean up and choose an adhesive. Follow these tips for a smooth, professional-looking finish. You should also be aware of the advantages and disadvantages of different adhesives and what they do to the surface. This article is not intended to replace professional advice, but to help you decide which product will work best for your project.

Materials

If you’re planning to apply PVC edge banding to your furniture, it is important to learn more about the different types of applications for this plastic. The plastic’s excellent processing properties have made it an ideal material for this purpose. PVC edgebanding is available in various widths and thicknesses. In most cases, PVC edgebanding is applied to the curved parts of furniture. Here are some helpful tips for applying PVC edgebanding to curved parts of your furniture.

Application

This report focuses on the market dynamics for PVC Edge Banding. It provides detailed analysis of the competitive landscape and the latest market trends, along with future prospects and business ventures. The study also analyzes the profile and strategies of leading organizations operating in the PVC edge banding market. Furthermore, it examines the value chain, income, and opportunity windows. As a result, it reveals that the PVC edge banding market is projected to grow at a considerable rate.

Cleaning up

If you’ve had trouble with a stubborn area of pvc edge banding, you’re not alone. It can be difficult to know exactly where to start when it starts to appear sloppy and unattractive. If you’re not careful, the glue can even get on the edge banding itself! There’s nothing worse than smudges, stringing, or excess glue along the bondline!

Adhesive options

There are two main types of adhesive for pvc edge banding. Glue and acetone are two common choices. Each has advantages and disadvantages, so choosing the right one depends on the needs of the project. EVA Adhesive is the most cost-effective option, and has standard heat and water resistance. It is also easy to work with. The two other types of adhesives are PUR and hot melt glue.

Color match-look-up

You want to be certain that your edges match. When applying PVC edge banding, a poor color match will compromise the overall appearance of your product. Generally, you can match the color of edge banding with your edge banding supplier when you are making an order. So that you can reduce more your energy to match color by yourself. Of course, if you order furniture paper and edge banding from one decorative paper supplier, it will be not a problem anymore.

Durability

If you want to protect the edges of your woodwork, consider installing a pvc edge banding. Usually, edge banding comes in rolls with an adhesive backing, while the non-adhesive type will require more installation work. PVC veneer is a thin, plastic sheet that is adhered to a panel’s edge using glue. Its strength and durability are enhanced by its protective properties.

Cost

PVC Edge Banding is an excellent way to give your TFL the perfect finished edges. This plastic splint is made of PVC, which is a durable thermoplastic with excellent impact and thermal resistance. You can find more information about PVC edge banding in the technical data sheet of Yodean Decor. The cost of PVC edge banding can vary depending on the length, type of PVC filing used. This material is available in rolls of 50 meters or more.

/0 Comments/by

What is application of melamine?

What is application of melamine?

What is application of melamine

During the manufacturing process of melamine tableware, the material undergoes a series of chemical reactions to transform it into a thermosetting plastic, a substance that oozes with formaldehyde. In this way, melamine can be glazed, laminated, and designed. In addition, melamine can be an excellent electrical insulator. If you are wondering about the safety of melamine tableware, read on to learn more about its properties.

Melamine formaldehyde is a thermosetting plastic

A thermosetting plastic that melts when heated is known as melamine. It is a naturally occurring organic compound that is combined with formaldehyde to form melamine-formaldehyde. This chemical is found in particleboards and other types of flooring. Melamine is used as an additive in many products, including laminates, kitchenware, and floor tiles. The resin is also heat resistant and fire retardant, making it useful in various industrial applications.

A chemical reaction is used to convert melamine to a solid material. Adding melamine to urea produces a sulfate-containing compound. The melamine-formaldehyde reaction is carried out at a temperature of 70 deg C and pH 8.5. The solid content increases as melamine concentration is increased. The reaction is conducted at the same temperature as urea, and it has a semi-linear structure.

It is a good electrical insulator

In addition to being an electrical insulator, Melamine also has a high degree of flammability and chemical resistance, and is widely used in electronic equipment. It is also available at low prices and has excellent acoustic properties. These two qualities make Melamine an excellent choice for thermal insulation. The disadvantages of Melamine include its low density and high flexibility, which can be problematic if the insulating material needs to be moved or placed at high temperatures.

Aside from being a good electrical insulator, Melamine is also a good thermal conductor, making it useful in heat-sinking transistors. It is also used in composite tapes and film sheets, such as melamine decorative paper. Mica laminate is resistant to heat and humidity and does not outgas. It also has low toxicity and can withstand high temperatures and humidity. However, it is not recommended for use in heating and cooling systems as it may cause a fire.

It is a thermoplastic polymer

Although melamine is a thermoplastic polymer, it is not a plastic. A thermoplastic polymer melts when heated. It is used in a variety of applications, including upholstery and fire-resistant gloves. It is also a good material for kitchen tools because of its ability to block flames. This makes it a good choice for kitchens with hot pots and pans, which need to be protected from heat.

While the exact physio-chemical mechanisms involved in polymer decomposition are unknown, polymeric materials can exhibit hazardous behavior when heated. Melted polymers are often component parts of a ceiling or enclosure. Despite the potential hazards associated with polymeric materials, recent attempts have been made to quantify melt-drip and mass loss. In this article, we will discuss experimental and theoretical aspects of melt-drip behavior in thermoplastics under heat/fire conditions.

It can be designed, glazed, and laminated

Because it resembles other materials, melamine can be designed, glazed, or laminated to create the look you want. The resin, which is typically white, is mixed with other compounds to form a polymer. This substance is also thermosetting, so melamine is shaped under high temperatures. Once molded, it holds its shape forever. This material is also durable, but you need to pay attention to proper installation and assembly.

The chemical compound melamine is a white solid with a cyanamide trimer backbone. Melamine is often designed and glazed for a variety of applications, including laminates, glues, and paper. The resin is typically mixed with strengthening materials and is extremely durable. This material is sold at a premium price. But it is well worth the price, especially if you’re looking for a durable, stylish product.

It can be used in the microwave

If you are planning to use melamine plates for microwave cooking, you should be aware of a few facts first. Microwaves can damage melamine plates, causing chemicals to leech into your food. In addition to being harmful for the environment, melamine is not dishwasher safe. It is best to avoid the microwave when you are preparing meals at home. You should avoid using microwaves for taking out containers, storing yogurt, water bottles, or condiment containers. In case you do purchase a set of melamine dishes, you should check for the corresponding symbols.

Fortunately, melamine is not harmful to human health. It is made from wood pulp and is often found in reusable dinnerware. It is not intended for high temperatures, and if exposed to heat, it will break or become weaker. However, it is perfectly safe to use melamine for serving dishes and dinnerware in the microwave. For safety, you should use a glass or ceramic dish instead.

It can migrate to foods

The migration of substances from melamine-based tableware to food is a significant concern. The extent of migration depends on the temperature, nature, and duration of contact. There are no international limits for melamine migration, although specific limits have been established in Mainland China and the European Union.

/0 Comments/by

Why PVC edge banding?

PVC edge banding is mainly used for sealing the cross-section of the board, so as to protect the board from the environmental damage, especially for the damage of the water in the air. In addition, PVC veneer edge banding not only can prevent the volatilization of formaldehyde inside the board, but also achieving a beautiful decorative effect for the furniture.

What is PVC edge banding?

The main component of PVC is polyvinyl chloride. It is made of PVC resin as main raw material, adding suitable anti aging agent, stabilizer, calcium carbonate, CPE, dyed agent, epoxidized soybean oil and modifier. It can be divided into soft PVC and hard PVC.

 

The category of PVC edge banding

PVC edge banding can be divided into plain PVC edge banding and wood grain PVC edge banding.

 

About the plaint color

 

Plain color refers to the red, yellow, blue, green, etc. in daily life, which can be called plain color,the essence of it is single color.

 

The structure of the plain PVC edge banding

 

The upper layer is made of PVC material, and the bottom layer is made of the glue. It is relatively simple to use plain color edge banding board first, while the white panel is white edge banding strip, and so on. Generally, the color is different, so when adjusting the color, the manufacturer will ask the customer to provide the reference color, such as the panel sample, the panel color card, etc.

 

About the wood grain color

 

Wood grain color is the surface with paint printing paint, forming similar to the effect of the wood veneer lines.

 

The structure of the wood grain PVC edge banding

 

The middle layer is PVC base material, the surface layer is paint printing, and the bottom layer is primer.

 

So the price of the wood grain edge banding is higher than that of the plain edge banding slightly.

 

The advantages of the PVC edge banding

 

  • PVC edge banding is light, comparing with the metal and plexiglass. The reason why it is light is not because it is a high molecular compound, but because it is an organic compound, which is composed of light elements such as carbon, hydrogen, oxygen and nitrogen。

 

2、The material of PVC edge band is plastic, which is easy to process. Plastic has plasticity, which means deformation after heating or pressure, and maintain its original shape after cooling or pressure disappearing. It can be processed into different shapes by extrusion, such as T-shaped, H-shaped, D-shaped, V-shaped, I-shaped, etc.

 

  • PVC edge banding has high quality and low price, and the price changing of plastic is  less than that of metal.

 

4、Plastic doesn’t easily to decay or rust. However, this feature also brings a serious problem to human beings: because plastic is not easy to decay, a large number of plastic wasted can not be absorbed and decomposed by nature, which results in a certain degree of environmental pollution.

 

 

/51 Comments/by

What is the PVC edge banding? How to Choose qualified PVC edge banding?

What is the PVC edge banding?

PVC edge banding is one kind of thermoplasticity coiled material made by the polyvinyl chloride in the way of calender by mixing up with the auxiliary, such as the plasticizer, stabilizer, lubricant, and the dye.

The PVC edge banding is always used with furniture contact paper, to decorate a better overall effect of furniture. In the furniture decoration market, the wood grain furniture paper is one of the popular contact paper, so the popular PCV edge banding is wood grain edge banding too, especial for maple edge banding and walnut edge banding.

The advantages of the PVC edge banding

1、Soft surface, although the surface was printed the wood、marble and the cloth texture on the surface, it still could keep the surface soft.
2、Having the realism and the third-dimension as the real wood.
3、Having a certain degree of the cleanliness feature and the decorative feature.
4、Having certain degree of heat resistance, chemical resistance, and corrosion resistance.
5、Having certain degree of solidity on the surface.

The main function of the edge banding.

1、Banding the panel section to avoid the damage caused by some negative elements in the environment and the using process (pay more attention for the water).

2、Avoid the volatilization of the formaldehyde hiding in the panel to achieve the function of decorative feature.

About the calcium carbonate powder (usually be called lime powder)

Generally, there is some calcium carbonate in the PVC edge banding. And the content of the calcium carbonate powder should be kept in an appropriate quantity. If it too high which will make the structure of the PVC loose and affect the quality of the PVC edge banding heavily, causing a lot of problem, such as

1、Crease in white.

It means that the edge banding is flexed in arc-shaped which will caused the white crease. Once the white crease caused and it will not disappear, even through the edge banding is straightened again.

2、Edge curl

It means that handling the detail about the edge banding will cause a gap, producing the edge curl. There is no doubt that edge curl also caused by other situation, take a example, the different of the speed and the order of adding the hot melt adhesive and raw material will not make the edge banding attaching on the panel tightly which lead to the edge curl appearing。

3、Poor appearance with the dim glossiness

After the edge banding is cut in detail and polished. The glossiness of is will become dim and fuzzy, leading to the appearance poor. At the present market, a lot of manufactures will add more calcium carbonate powder. Sometimes the content of the calcium carbonate powder will even over 60%. And the reason for why dose the different type of edge banding with the same brand sell in different price, the key reason is the content of the calcium carbonate powder.

4、Cracking

Due to the high content of calcium carbonate, the edge band has no toughness, and the internal structure will be loose. If it is affected by external force slightly, it will crack, especially in the transportation with low temperature.

5、The problems in surface printing

There are two technologies for surface printing: printing and heat transfer film. The surface of heat transfer film is glossy, and the product looks bright and layered. Then due to its high cost, slow transfer speed and inconvenient color assortment with the panel, it has been replaced by printing. However, some low quality PVC edge banding is added in excess calcium carbonate powder, which makes the problem about discoloration, whatever which printing technology we choose, the discoloration still can not be handled，so the technology of heat transfer film also be choose some time.

 

/0 Comments/by

How to find the qualified PVC edge banding.

,

How to find the qualified PVC edge banding.

The notes of purchasing on PVC edge banding

A: Slide surface with no bubbles，no lines and temperate glossiness.

B:Both the surface of it should keep the same degree of flat, thickness and width.

C: Equitable hardness with higher elasticity, better quality and stronger wear resistance

D: After handing, the side color of the edge banding should be similar with the color of the surface. And we should make sure that the degree of the whiteness should not be very obvious, at the same time it should have a slight glossiness, if not the PVC edge banding must be made up by the low-quality materials, which will lead to the color of the furniture become inharmonious.

E: The treating agent of the back surface should be uniform. In general, the transparent and white treating agent is well. And if the back is not handled properly, it will lead to low bonding strength after edge sealing, or even can not be bonded.

F: The color of each batch of edge banding must be consistent. The smaller the color difference of different batches, the better the quality

G: The edge is cut off with flexibility and no cracking.

H: The transparent sealing glue (adhesive paper used for sealing carton) is pasted on the sealing edge. Rub it back and forth for several times with your finger at the position where the sealing glue is pasted, and then pull it to test whether there is discoloration in the edge banding.

About the PVC edge banding produced by the YODEAN.

YODEAN produces the PVC edge banding by using imported equipment and materials. The color of the edge and surface is the same, and it could resistant the high temperature and the low temperature. So the PVC edge banding produced by the YODEAN always be chosen in the field in upscale furniture, cabinet, door, shelf, office. Meanwhile, the YODEAN could provide a variety of sizes of the PVC edge banding according to the product specifications or customer requirements.

Yodean specializes in furniture decorative paper, with 5 years experience, equipped with imported edge banding machine and production lines, so  Yoean has enough ability for big production in a short time, if you are looking for a PVC edge banding for furniture, please feel free to contact Yodean.

/1 Comment/by